Nordictrack Bike S22I Resistance Not Working [Here'S The Fix!] (2024)

Sometimes we may earn commission from qualifying purchases through links - at no extra cost to you.

Do you own a NordicTrack S22i bike and are experiencing resistance issues If so, you’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, I’m here to help.

In this troubleshooting guide, I’ll walk you through the steps to identify and fix the problem. I’ll also provide some tips on how to prevent resistance issues from happening in the future. So if you’re ready to get your bike back in working order, let’s get started!

Reasons Why Nordictrack Bike S22I Resistance Not Working

1. Faulty Resistance Control Board

The resistance control board is responsible for sending signals to the motor to adjust the resistance level. If the board is faulty, it may not be able to send the correct signals, resulting in the resistance not working properly.

2. Faulty Motor

The motor is responsible for generating the resistance. If the motor is faulty, it may not be able to generate enough resistance, resulting in the resistance not working properly.

3. Loose or Damaged Resistance Wires

The resistance wires connect the resistance control board to the motor. If the wires are loose or damaged, they may not be able to properly transmit the signals from the control board to the motor, resulting in the resistance not working properly.

4. Dirty or Clogged Resistance Pads

The resistance pads are located on the flywheel and generate the resistance by creating friction. If the pads are dirty or clogged, they may not be able to generate enough resistance, resulting in the resistance not working properly.

5. Misaligned Resistance Pads

The resistance pads must be properly aligned in order to generate the correct amount of resistance. If the pads are misaligned, they may not be able to generate enough resistance, resulting in the resistance not working properly.

6. Faulty Resistance Adjustment Knob

The resistance adjustment knob is used to manually adjust the resistance level. If the knob is faulty, it may not be able to properly adjust the resistance level, resulting in the resistance not working properly.

How to Troubleshoot: nordictrack bike s22i resistance not working

Symptoms

The resistance knob does not change the resistance level.
The resistance level does not change when you change the resistance level on the console.
The resistance level changes on its own.
The resistance level is not consistent.

Causes

The resistance knob is not connected to the motor properly.
The motor is not working properly.
The console is not sending the correct signal to the motor.
The resistance sensor is not working properly.

Solutions

1. Check the resistance knob connection:
Make sure that the resistance knob is securely connected to the motor. If it is not, reconnect it.

2. Check the motor:
If the motor is not working properly, you will need to have it repaired or replaced.3. Check the console:
If the console is not sending the correct signal to the motor, you will need to have it repaired or replaced.

4. Check the resistance sensor:
If the resistance sensor is not working properly, you will need to have it repaired or replaced.

How to Fix: nordictrack bike s22i resistance not working

1. Check the resistance knob connection:
To check the resistance knob connection, follow these steps:

1. Turn off the bike and unplug it from the outlet.
2. Locate the resistance knob on the front of the bike.
3. Remove the knob by turning it counterclockwise.
4. Look inside the knob housing for any damage or corrosion.
5. If you see any damage or corrosion, clean it off with a soft cloth and some rubbing alcohol.
6. Reattach the knob and turn it clockwise to tighten it.
7. Plug the bike back in and turn it on.

FAQs: NordicTrack Bike S22i Resistance Not Working

Why is the resistance not working on my NordicTrack Bike S22i?

There are a few possible reasons why the resistance may not be working on your NordicTrack Bike S22i. Here are some of the most common causes:

The resistance knob is not turned all the way up: Make sure that the resistance knob is turned all the way up to the highest setting.

The resistance cable is not connected properly: Check to make sure that the resistance cable is connected securely to the bike and to the console.

The resistance motor is not working properly: If the resistance motor is not working properly, you will need to have it serviced or replaced.

How do I adjust the resistance on my NordicTrack Bike S22i?

To adjust the resistance on your NordicTrack Bike S22i, you can use the resistance knob on the console. The resistance knob is located on the right side of the console, just below the screen. To increase the resistance, turn the knob clockwise. To decrease the resistance, turn the knob counterclockwise.

What are the different resistance levels on my NordicTrack Bike S22i?

The NordicTrack Bike S22i has 24 resistance levels, ranging from 0 to 24. Level 0 is no resistance, and level 24 is the highest resistance. You can choose the resistance level that is right for you based on your fitness level and goals.

How can I troubleshoot resistance problems on my NordicTrack Bike S22i?

If you are having problems with the resistance on your NordicTrack Bike S22i, here are a few things you can try:

Check the resistance knob to make sure that it is turned all the way up:

Check the resistance cable to make sure that it is connected securely to the bike and to the console:

Try restarting the bike:

If the problem persists, you may need to have the bike serviced or replaced:

What should I do if the resistance motor on my NordicTrack Bike S22i is not working?

If the resistance motor on your NordicTrack Bike S22i is not working, you will need to have it serviced or replaced. You can contact NordicTrack customer service for assistance.

Also Read THIS: Nordictrack Bike S22I Screen Not Working